Self Adhesive Paper Towel Holder Under Cabinet/Wall Mount - Stainless Steel

Smooth surfaces such as wooden, ceramic tiles, marble stone, metal, glass, etc., are suitable for adhesive application. Surfaces like painted walls, limestone walls, wallpaper, or uneven surfaces are not applicable for adhesive use.

Installation Steps:

1. Clean the surface thoroughly to remove any dust or debris.
2. Ensure that the wall is dry before proceeding.
3. Peel off the protective layer from the back of the paper towel holder and firmly press it onto the wall. Hold it in place for a few seconds.
4. Wait for 24 hours before hanging paper towels to allow the adhesive to set properly.

Removal Instructions:

Use a hair dryer to heat the adhesive, then carefully use a blade to scrape it off step by step.

Why Choose VAEHOLD Paper Towel Holder?

1. Versatile use in the kitchen, bathroom, farmhouse, RV, and other areas where paper towels are needed.
2. Can be installed using either adhesive or drilling methods.
3. Paper towel bar length: 12 inches, suitable for all sizes of paper towel rolls.

Two installation options are available: adhesive or drilling. Simply peel off the adhesive pad film and firmly stick it to a smooth wall surface. Alternatively, drill holes in any surface to install using screws.

Specifications:

• Paper towel bar length: 11 4/5 inches
• Plate dimensions: 5.7 x 1.77 inches

Applicable Surfaces for Adhesive Use:

Smooth surfaces such as wooden, ceramic tiles, marble stone, metal, and glass are suitable for adhesive application. Please note that adhesive is not suitable for use on painted walls, limestone walls, wallpaper, or uneven surfaces.

Suitable for Most Paper Towel Sizes:

This napkin roll holder can store and dispense both standard and jumbo paper towel rolls effectively.

Details Processing:

Each product undergoes strict polishing and inspection to ensure safety with no sharp edges.

product information: